The Hobby Aqua Cooler
The Hobby Aqua Cooler provides cooling for the tank. The Aqua Cooler is easy to install. With the help of the terminals of the fan to the glass cover with a thickness up to 25 mm can be attached. The unit has a 55° tilt. For added security, the fans are equipped with safety grid. It is made from non-rusting aluminium, and is therefore suitable for salt water.
In an aquarium with the temperature is a huge factor in the well-being of the animals. Most of the large groups will feel comfortable at a temperature of 24 to 26° C. This temperature should also be as precise as possible, not be exceeded. Temperatures of over 30° C and away from extreme temperatures for many of the inhabitants, and the planting of a problem. Changes in temperature contribute to stress and may, the fish seem to fail. Lighting, pumping, room-temperature, and direct sunlight can make the water temperature in the aquarium to an unhealthy level, it can increase.
With the help of aquarium chillers b.v.: Aqua Cooler V2, V4 or V6), it is possible to set the temperature at a healthy level. Due to the production verdampingskoude, when the temperature in the tank.
The Hobby Aqua Cooler is suitable for aquarium glass, and aquarium-side up. 25 mm in thickness. Includes: transformer for protective low voltage (12V).
The Hobby Aqua Cooler features
|
V2 |
4 |
V6 |
| Power Consumption (12 V): |
4.5 w |
Of 8.6 Watts |
To 12.7 Watts |
| Revolutions per minute: |
5000 |
5000 |
5000 |
| Noise: |
< 35 dB |
< 38 dB |
< 41 dB |
| Size: |
18 x 4.5 x 14 cm |
30 x 4.5 x 14 cm |
42.5 x 4.5 x 14 cm |
| For the tank: |
max of 120 to L |
up to 300 L |
300 L |
| Cooling capacity: |
up to 4° C |
up to 4° C |
up to 4° C |
