Aqaurio Neo CO2 diffuser Tiny
Available in: Standard or Extended
Aqaurio Neo CO2 diffuser Tiny is made of a special type of plastic with a small earthenware effervescent part. The standard version is 85mm high and comes with a U-bend. The extended version has an extra long tube that can be bent to the desired height. This makes it possible to adjust it perfectly at a height that suits the aquarium. With other CO2 diffusers, the CO2 hose is often placed in the aquarium. That does not happen with this extended CO2 diffuser, because the connection to the hose is outside the aquarium.
Aquario Neo CO2 diffusers use a special membrane that produces very fine mist. The fine CO2 bubbles are optimally dissolved in the aquarium water.
The package contains a 16cm piece of tube to practice bending with before bending the final version.
1. Slide the rubber wire into the tube
2. Heat the tube over a length of 1~3 cm at the bending point. Use a lighter. Hold these 1-3 with the flame under the tube. Rotate the tube so that it becomes heated all around.
3. Once the material softens, bend the tube over the edge of the aquarium as desired.
4. Remove the rubber wire after curing for 20 seconds.
Do not hold too close to the flame. The plastic may turn black.
Once bent and cured there is no going back.
Standard: length: 85mm
Extended: length: 390mm