Azaqua Inline CO2 atomizer
This inline CO2 atomizer ensures that CO2 is maximally dissolved in the aquarium. Simply connect the CO2 atomizer to the hose of the external filter and the fine bubbles are immediately carried away by the passing water. Not only are the bubbles extremely small (= large contact surface) thanks to the ceramic membrane, but they also come into contact with as much water as possible. Dissolving CO2 extremely efficiently!
This model of external CO2 atomizer is smartly designed. The filter hose from the filter outflow can be connected on both sides and carefully tightened. The ceramic membrane is round and has the same diameter as the hose. Water that passes does not experience any form of resistance. So there is no loss of flow capacity. Due to the cylindrical shape of the ceramic membrane, there is a very large surface area where the CO2 bubbles can be released and carried along with the water. A pressure of 1.5 bar is sufficient to squeeze out CO2. The CO2 hose can be connected and secured on the side. All connections are equipped with rubber rings, which minimizes the risk of leaks.
Technology that is visibly present in the aquarium can be an eyesore. This external CO2 atomizer can be completely concealed from view. The only thing visible in the aquarium are the extremely fine CO2 bubbles. These will be easily absorbed by the plants, causing the plants to grow better.
The Inline CO2 atomizer is a practical and very efficient way to add CO2!
Available for 12/16 or 16/22 hose connection
Please note: Only after 36 hours has the membrane been properly watered in and its effectiveness can be assessed.
It doesn't matter which direction it is placed.
Azaqua Inline CO2 atomizer properties
Type: | 12/16 | 16/22 |
Filter hose connection: | 12/16mm | 16/22mm |
CO2 hose connection: | 4/6mm | 4/6mm |
Dimensions (LxDxH): | 50x30x100mm | 55x35x138mm |
Choose the correct diameter for 12/16 or 16/22 hose