Strideways Pro CO2 Regulator
NOTE: Product with signs of use (on the nut from tightening). Fully working and checked.
Professional CO2 regulator for accurately dosing CO2 to the aquarium. Equipped with 12V solenoid valve and CO2 bubble counter. Complete set, ideal for beginners with quality for professionals.
Adjusting CO2 is flawless with this CO2 regulator. The operating pressure can be precisely adjusted with just a turn of the comfortable knob. Somewhere 0.25 - 0.30 MPa is a good starting point. To adjust the desired number of bubbles, there is a convenient fine adjustment on the side. The result is immediately visible in the linked CO2 bubble counter. This can be tilted 360 degrees. The bubble counter can therefore be positioned upright at all times. So for all European CO2 bottles with the screw right on the bottle as well as on the front.
Shut off CO2 dosing at night
To shut off the CO2 dosing at night, this CO2 regulator is equipped with an integrated 12V solenoid valve. This works on USB with included adapter for the wall socket. Power consumption, and in particular heat output, is low due to the 12V. Moreover, this provides extra safety around the aquarium. High-quality materials have been used. This can be immediately felt by the weight. The sealing ring is also of ultimate quality and stronger than other rings on the market.
Don't know anything about dosing CO2 or installing a complicated system? No problem. Included is a wrench to tighten the CO2 regulator securely onto the bottle. Always screw the CO2 regulator firmly onto the bottle to prevent leaks. Furthermore, the installation is very simple and the system can be put into use in just a few steps. Always check the hoses and connections for any leaks with dishwashing foam to ensure that no CO2 is lost.
Strideways Pro CO2 regulator features
||10cm (14cm incl. bubble counter)
||11 cm (16cm incl. bubble counter 90°)
||CO2 bubble counter