Azaqua CO2 bubble counter METAL
Easy complete
Combine with
|
|
|
|
|
Need help?
|
|
|
|
|
A metal CO2 bubble counter with integrated check valve. With the extra nipple it can be connected directly to the CO2 pressure regulator.
- Remove the nipple for the hose connection of the pressure regulator (open-end wrench 12).
- Screw the nipple supplied with the Bubble Counter Metal onto the Pressure Regulator.
- Remove the white silicone ring from the bubble counter reservoir by unscrewing the top part of the bubble counter.
- Place the white silicone ring between the nipple and bubble counter and tighten the bubble counter.
- Fill the bubble counter with water and screw the top back on.
- Connect the hose to the bubble counter.
Filling is easy by unscrewing the top part and carefully pouring water into it.
There is a small silicone ring in the reservoir of the bubble counter. This must be placed between the connection of the nipple of the pressure regulator and the bottom of the bubble counter. Metal on metal does not provide a gastight seal. The silicone ring prevents gas leakage.
High pressure is also no problem for this bubble counter.
Height: 80mm
Diameter: 23mm