Azaqua Inline CO2 atomizer
These inline CO2 atomizer ensures that CO2 is maximum is fixed in the aquarium. Connect the CO2 atomizer to the hose of the external filter and the fine bubbles will be immediately taken away by the passing water. Not only are the bubbles very small (=large contact surface thanks to the ceramic membrane, but they also come in contact with, as much as possible water. Extremely efficient CO2 dissolve so!
This model external CO2 atomizer is cleverly designed. On both sides is the conversion of filter tube of the outflow of the filter and carefully to turn. The ceramic diaphragm is round and has the same diameter as the hose. Water that passes through, so no form of resistance. So there is no loss of the stromingscapaciteit. Due to the cylindrical shape of the ceramic membrane, there is a very large surface where the CO2 bubbles on the water can be issued and carried. A pressure of 1.5 bar is enough for CO2 to squeeze out. To the side of the CO2 hose to connect it and to fix it. All connections are equipped with rubber rings, so the chance of leakage is minimal.
Technique that is visible in the aquarium, it may be a thorn in the eye. This external CO2 atomizer is completely out of sight. The only thing that is visible in the aquarium, are the ultra-fine CO2 bubbles. This will easily by the plants are recorded, allowing the plants to better grow.
The Inline CO2 atomizer is a very practical and efficient way to get CO2 to add !
Available for 12/16 or 16/22 hose connection
Note: Only after 36 hours is the membrane good ingewaterd and can the operation be assessed.
Properties Inline CO2 atomizer
Type: |
12/16 |
16/22 |
Conversion of filter tube connector: |
12/16 mm |
16/22 mm |
CO2 hose connection: |
4/6 mm |
4/6 mm |
Dimension (LxDxH): |
50x30x100 mm |
55x35x138 mm |