Daytime Onex mounting
Daytime onex LED aquarium lighting can be placed above the aquarium in various ways:
Acrylic adapter set
With these crystal clear supports, a Daytime Onex can be placed on an open aquarium and is ideal for an aquascape aquarium. The set is connected to the onex inline adapter system with the supplied screws. Use the extendable adapter pins to precisely match the length to that of the aquarium. The light distribution of the onex is then approximately 30 mm from the water surface.
onex®
profile | Length of
onex® profile | In combination with
acrylic adapter set
for aquarium length |
|---|
| onex20 | 16.5 cm | 17.5 – 27.5 cm |
| onex30 | 24.0 cm | 25.0 – 35.0 cm |
| onex40 | 32.5 cm | 33.5 – 43.5 cm |
| onex50 | 42.0 cm | 43.0 – 53.0 cm |
| onex60 | 54.0 cm | 55.0 – 65.0 cm |
| onex70 | 63.5 cm | 64.5 – 74.5 cm |
| onex80 | 72.0 cm | 73.0 – 83.0 cm |
| onex90 | 84.0 cm | 85.0 – 95.0 cm |
| onex100 | 93.5 cm | 94.5 – 104.5 cm |
| onex110 | 102.0 cm | 103.0 – 113.0 cm |
| onex120 | 114.0 cm | 115.0 – 125.0 cm |
| onex130 | 123.5 cm | 124.5 – 134.5 cm |
| onex140 | 132.0 cm | 133.0 – 143.0 cm |
| onex150 | 144.0 cm | 145.0 – 155.0 cm |
| onex160 | 153.5 cm | 154.5 – 164.5 cm |
| onex170 | 162.0 cm | 163.0 – 173.0 cm |
| onex180 | 174.0 cm | 175.0 – 185.0 cm |
| onex190 | 183.5 cm | 184.5 – 194.5 cm |
| onex200 | 192.0 cm | 193.0 – 203.0cm |
Insert-screw Adapter Set
For an aquarium with a light hood with slots, a light hood with screw options, a light hood with internal glass strips/stabilos, etc. The insert-screw adapter set is flexible and can be used both hanging and horizontal. The holders can be screwed onto the extendable adapter pins from Onex, so that they can be made to fit the aquarium.
onex®
profile | Length of
onex® profile | In combination with
insert adapter set
suitable for aquarium length |
|---|
| onex20 | 16.5 cm | 19.5 – 29.5 cm |
| onex30 | 24.0 cm | 27.0 – 37.0 cm |
| onex40 | 32.5 cm | 35.5 – 45.5 cm |
| onex50 | 42.0 cm | 45.0 – 55.0 cm |
| onex60 | 54.0 cm | 57.0 – 67.0 cm |
| onex70 | 63.5 cm | 66.5 – 76.5 cm |
| onex80 | 72.0 cm | 75.0 – 85.0 cm |
| onex90 | 84.0 cm | 87.0 – 97.0 cm |
| onex100 | 93.5 cm | 96.5 – 106.5 cm |
| onex110 | 102.0 cm | 105.0 – 115.5 cm |
| onex120 | 114.0 cm | 117.0 – 127.0 cm |
| onex130 | 123.5 cm | 123.5 – 133.5 cm |
| onex140 | 132.0 cm | 135.0 – 145.0 cm |
| onex150 | 144.0 cm | 147.0 – 157.0 cm |
| onex160 | 153.5 cm | 156.5 – 166.5 cm |
| onex170 | 162.0 cm | 165.0 – 175.0 cm |
| onex180 | 174.0 cm | 177.0 – 187.0 cm |
| onex190 | 183.5 cm | 186.5 – 196.5 cm |
| onex200 | 192.0 cm | 195.0 – 205.0 cm |
This is the ideal solution to replace T5 or T8 tubes for high-quality LED lighting. These plastic fittings can be screwed onto the adjustable Onex adapter pins. The accessories then fit into the existing holders in the light hood.
Supplied with screws and screwdriver for quick installation.
Existing T5/T8 lamps
(tube length without contact pins) | tube type and power | suitable onex®
with T5/T8 adapter |
|---|
| 438mm* | T8-15 watts | T5-24 watts | onex40 |
| 517mm | T5-13 watts | onex50 |
| 549mm | T5-14 + 24 watts | onex50 |
| 590mm* | T8-18 watts | T5-28 watts | onex60 |
| 742mm* | T8-25 watts | T5-35 watts | onex70 |
| 849mm | T5-21 + 39 watts | onex80 |
| 895mm* | T8-30 watts | T5-45 watts | onex90 |
| 1047mm* | T8-38 watts | T5-54 watts | onex100 |
| 1149mm | T5-28 + 54 watts | onex110 |
| 1200mm* | T8-36 watts | T5-54 watts | oenx120 |
| 1449mm | T5-35 + 49 + 80 watts | onex140 |
| 1500mm | T8-58 watts | onex150 |
* suitable for aquariums and lamps from JUWEL® and other manufacturers
Nano Acrylic adapter set (L10 or L15)
Design arches made of crystal clear acrylic for open nano aquariums. The acrylic arches are connected to the onex® inline adapter system with the supplied stainless steel screws.
A maximum of 2 Onex® lamps can be mounted. There are 2 sizes and arc lengths available. A transparent silicone rubber band is used to secure the light connection cable in a visually elegant manner.
Suitable for aquariums with glass thicknesses up to 6 mm.
Contents:
2 acrylic arches with KU locking screws
4 stainless steel screws
1 hex key
1 silicone rubber ring
Acrylic Twin Adapter Set
Designer supports made of crystal clear acrylic for open aquariums, ideal for large aquascaping aquariums for 2 Onex® lamps. The set is connected to the onex® inline adapter systems with the supplied stainless steel screws. The width can be precisely adjusted and fixed to the length of the aquarium. With this adapter set, the light output of the onex® is located approximately 60 mm above the edge of the aquarium.
CNC-milled steps provide a secure stand and ensure that the Onex® lamps can be easily moved for maintenance work.
Ceiling hanging set
High-quality and very delicate steel wire suspension made of stainless steel for hanging an onex over the aquarium.
This can be easily adjusted in height without tools.
The length of the steel cables is 2 meters.
Delivery time: 1 to 3 weeks
