Azaqua Metal Pipe Set
Glass inflows and outflows can break during maintenance work. The Azaqua Metal Inflow and Outflow are unbreakable and look chic and stylish.
Available in 4 versions. Choose the desired size.
Glass inflows and outflows can break during maintenance work. The Azaqua Metal Inflow and Outflow are unbreakable and look chic and stylish.
Available in 4 versions. Choose the desired size.
Glass inflows and outflows can break during maintenance work. The Azaqua Metal Inflow and Outflow are unbreakable and look chic and stylish.
The inflow is equipped with small holes to suck in the water evenly. Large enough to allow dirt particles to pass through to the filter. Small fish, large shrimps or dead leaves will be stopped.
The end of the outflow is slightly pinched. This creates a stronger jet that creates more current in the water. When Inflow and Outflow are correctly arranged in the aquarium, ideal water circulation can take place.
For anyone who does not like to look at algae deposits in the glass inflow, this stainless steel inflow and outflow is also a solution. Only the outside is visible and it looks very nice with the brushed stainless steel look. For extra ease of maintenance, the part with holes can be disconnected.
Name: | Set 13-S | Set 13-M | Set 13-L | Set 17-L |
Item No: | AZ4051 | AZ4054 | AZ4057 | |
Aquarium contents: | 10-60 L | 50-200 L | 50-200 L | 160-700 L |
Tube diameter: | Ø13mm | Ø13mm | Ø13mm | Ø17mm |
Filter hose: | 12/16mm | 12/16mm | 12/16mm | 16/22mm |
Outflow: | ||||
Height: | 15.5 cm | 20.5 cm | 20.5 cm | 20.5 cm |
Spacing: | 5 cm | 5 cm | 5 cm | 5.5 cm |
Total width: | 9.5 cm | 9.5 cm | 9.5mm | 10 cm |
Height to water level: | 5 cm | 5 cm | 5 cm | 5 cm |
Number of suction cups: | 1 | 2 | 2 | 2 |
Inflow: | ||||
Height: | 20 cm | 25 cm | 32.5 cm | 32.5 cm |
Inlet length: | 5.5 cm | 9 cm | 9 cm | 9 cm |
Total width: | 8 cm | 8 cm | 8 cm | 9 cm |
Spacing: | 5 cm | 5 cm | 5 cm | 5.5 cm |
Number of suction cups: | 1 | 2 | 2 | 2 |
OUR TIP: When connecting, wet the pipes before pressing them onto the hose. This way it slides on more easily. When removing the hose, first press it further. This way it releases more smoothly.