- New

Azaqua Inline CO2 Atomizer premium
Available for 12/16 or 16/22 hose connection
Need help?
Azaqua Inline CO2 Atomizer premium is the all-in-one solution to efficiently dissolve CO2 in the aquarium.
Commissioning
Connect the Inline atomizer to the output hose of the external filter. The best place is as close to the filter as possible. The contact time is then maximum before the CO2 enters the aquarium, which means that most of the bubbles will have already dissolved. Connect CO2 pressure hose or flexible CO2 hose to the nipple. For extra security, we recommend installing a check valve between the atomizer and solenoid valve. The first compartment contains the bubble counter. After some time it will automatically fill with water, making it possible to clearly adjust the dosage. In the second compartment the CO2 is pressed through the membrane. The result can be observed here.
The Azaqua Inline CO2 Atomizer premium can be attached to the inside of the aquarium with the supplied clamp.
A working pressure of 2 bar is recommended to force the CO2 through the membrane. The membrane is easy to clean or replace. By using a spare membrane, the CO2 system never has to be turned off for long.
Technology that is visibly present in the aquarium can be an eyesore. This external CO2 atomizer can be completely concealed from view. The only thing visible in the aquarium are the extremely fine CO2 bubbles. These will be easily absorbed by the plants, causing the plants to grow better.
Available for 12/16 or 16/22 hose connection
Please note: Only after 36 hours has the membrane been properly watered in and its effectiveness can be assessed.
Type: | 12/16 | 16/22 |
Filter hose connection: | 12/16mm | 16/22mm |
CO2 hose connection: | 4/6mm | 4/6mm |
Dimensions (LxDxH): | 63x25x120mm | 65x25x125mm |