With an Osmosis device, tap water with high hardness can easily be brought to the ideal water composition. By mixing this Osmosis water with tap water, it becomes possible to make the aquarium water soft and acidic in a responsible manner.
Complete, including installation
A good composition of the aquarium water is important for the health of fish and the growth of aquarium plants. With the help of an Osmosis device, tap water with high hardness can easily be brought to the ideal water composition. The Osmosis water produced by the Dennerle Osmosis Professional 190 can be collected in a jerry can, bucket or other collection vessel. By mixing this Osmosis water with tap water, it becomes possible to make the aquarium water soft and acidic in a responsible manner.
The process of reverse osmosis ensures that dissolved salts in the tap water are separated and collected in the filters. Osmosis water is therefore free of substances such as calcium, magnesium and carbonates (limescale/scale) that influence the hardness of the water. The conductivity (microsiemens), Total hardness (GH) and Temporary hardness (KH) are very low.
Do you have a plant aquarium and is the water coming out of the tap hard? Then it makes sense to use Osmosis water. In an aquarium where CO2 is administered, the CO2 no longer reacts with the salts first, but remains freely absorbable by aquarium plants. A pH value of 7.0 or lower is much easier to obtain and costs much less CO2 addition. Most aquarium fish also prefer soft and acidic water. Soft and acidic water is a must for their health and certainly for their reproduction. Special Taiwan bee shrimp also give the best breeding results in soft and acidic water.
The ideal water values (GH, KH and microsiemens) can be obtained by mixing the Osmosis water with the water from the tap. This will be 1:1 for one purpose and 1:6 for another.
Specifications Dennerle Osmosis Professional 190
Capacity/yield: 190L in 24 hours (at 25°C and 4 bar pressure)
Capacity under practical conditions: 80 - 185 l / day at 8-18°C and 3-5 bar pressure
Retention rate: minimum 95%
Ratio of osmosis water: residual water: approx. 1:2.5 to 1:4 (depending on pressure and temperature)
Can be connected directly and is supplied incl.
- membrane Professional 190
- Fine filter
- Activated carbon filter
- water tap connection 3/4" ("washing machine connection")
- flush tap
- wall bracket
- screws, hoses, etc.
Easy operation
3 year warranty (6 months on wear parts)
Our tip: Place the Osmosis device near the sink, garage with drain or bathroom. It can take 1 to 2 hours before a bucket is filled with Osmosis water and there is a chance that it will overflow if you are not careful.
With an Osmosis device, tap water with high hardness can easily be brought to the ideal water composition. By mixing this Osmosis water with tap water, it becomes possible to make the aquarium water soft and acidic in a responsible manner.
Complete, including installation
